X fly 3D cablecam / light

With the success of the cablecams X fly in 1D and 2D, XD motion has developed a new X fly configuration allowing movement in 3 dimensions. Using the latest technology, the X fly 3D is based on 4 fiber ropes attachment points and allows the dolly to move left & right, up & down and forward & backward. Safety critical software ensures collision avoidance as well as repeatable flight paths. The pilot can concentrate on the camera shots without having to look at the dolly camera. X fly 3D cablecam is reality augmented compatible for any actual 3D engine under FreeD protocol. XD motion provide all metadata for XYZ position, XYZ angles and zoom/focus positions.

Double ropes fiber winches: double safety & fibers for 3D and Ultra HD/motion cameras.
Compact winches 140 kg, less 1m cubic very light to install in the roof structure (catwalk).
Fiber control of cameras to the Gyro-stabilized camera HD/SDI, Painting.
Low power brushless winches motors: 380 volts/32 amps.
Total weight for shipping: under 1,5 Ton.
Hi-speed up to 12m/s & motion control software.
Payload of camera dolly: 25kg.
Option to replace the camera for light leds
Maximum flight box: 250m x 250m x 50m (XYZ).

* Motion Control available

X fly 3D Cablecam Light Specifications

CONFIGURATION	DYNAMIC LIGHT / SHADOW MOTION FROM ABOVE, 10 LED	MULTI-DIRECTIONAL 4 LED PANNEL	SPOT
Luminous flux (lumens)	130.000	52.000	5.000
Lighting power (W)	1.000	400	45
Power consumption (W)	1.560	480	45
Temperature	5600K (or 3.200K)	5600K (or 3200K)	5600K
Weight (lb)	8.487	3.306	1.653
Input voltage (V)	12 to 27	12 to 27	12 to 25,2
Dim voltage (V)	2 to 5	2 to 5
Dim range	30% to 100%	30% to 100%
Projection angle (base)	170°	170°	120°
Projection angle (lens)	60°	60°	50°
Projection angle (projector)	20°	20°	25°